Built with Qualcomm SDX55, the multi-mode 5G chipset, IMILINK 5G CPE supports both NSA and SA network modes with super high speed. Backwards, it also uses 4G as an alternative plan if the area does not have a 5G network.The 4 x 5.5dBi omni-directional antennas design ensures consistent coverage over a broad area with high-bandwidth 5G signal.
Thanks to the 5G SRS (Surrronding Reference Signal) Antenna Switching by 4 antennas, IMILINK 5G CPE Router detects the signal in real time to provide you with reliable performance even when encountering interference. It also helps to accelerate speed by 20% by intelligently pairing different channels.
IMILINK 5G CPE Router features outdoor installation, which makes it easier to receive 5G signal, even in remote regions where 5G signal is weak.
Providing you two ways of installation, wall-mounted and pole-mounted installation, it is also toughly built to withstand all kinds of weather conditions, rain or shine.
Equipped with a Gigabit Ethernet port, this IMILINK 5G CPE Router can be connected to a host of devices with Ethernet cables, making it possible to be applied in varied scenarios.
| Category | Feature & specification | Description |
| Basic Information | Model Name | IM953C |
| Form Factor | ODU | |
| Dimension | About 186*111*35mm | |
| Weight | About 570g | |
| Color | White | |
| Air Interface | Technical Standard | 5G NR Sub-6GHz, LTE |
| Frequency | 5G NR Sub-6GHz: TDD: N38/40/41/77/78/79 FDD: N1/3/5/7/8/20/28/71 LTE: FDD: B1/B3/B5/B7/B8/B18/B19/B20/B26/B28/B32 TDD: B34/B38/B39/B40/B41/B42/B43 |
|
| Performance | Sub6G | DL: BW 100MHz, up to 2.1Gbps UL: BW 100MHz, up to 0.9Gbps ERIP-max: 29dBm |
| LTE | DL: BW 140MHz, up to 2.0Gbps UL: BW 40MHz, up to 0.2Gbps ERIP-max: LTE-LB 23dBm, LTE-MB 24.5dBm, LTE-HB 26 dBm |
|
| BLE | BLE4.0, 2.4G (only used for configure) | |
| Hardware | Receive Diversity | Support Receive Diversity |
| MIMO | Support DL 4x4 MIMO | |
| Chipset | Qualcomm SDX55 | |
| USIM/SIM | 4FF SIM card(nano card) | |
| Memory | Modem: 4Gb NAND + 4Gb LPDDR4 | |
| Power consumption | <30W | |
| Ethernet | 1*Gigabit LAN port | |
| Power | POE (nonstandard default) (standard 802.3AF/AT/BT is compatible) | |
| LED | LED*4: 5G Sub6 network Indication LED, 4G network Indication LED, Power Indication LED, ETH status LED, |
|
| USB | USB 2.0 micro | |
| Antenna | Internal Antenna: 5G/4G*10 | |
| Buttons | Reset hole | |
| ESD | ESD Protection circuit, 8kV contact, 10kV air discharge | |
| Software | UI | WebUI |
| SW Update | Local Update | |
| APN | Support mutiple APN | |
| IP-Passthrough | Support | |
| FOTA | Support | |
| IPV4/IPV6 | Support | |
| Data Statistics | Support | |
| Automatic APN Matching According to USIM | Support | |
| SNTP | Support | |
| HTTP | Support | |
| HTTPS | Support | |
| Web Upgrade | Support | |
| TR069 | Support | |
| APP | BLE APP Support | |
| Environment | Installation | wall-mounted/pole-mounted |
| Waterproof level | IP65 | |
| Lightning Protection | provide outdoor ground terminal to lower the ground potential. When lightning does hit, it can discharge to earth ground. | |
| Operating Temperature | Meet ETSI 300 019-1-4 Class4.1 -40°C to +50°C |
|
| Storage Temperature | -40°C to +80°C | |
| Humidity | 5%~ 95% |
*Accessibility of some features may vary across regions. Product pictures and display contents on the foregoing pages are provided for reference only. Actual product features and specifications (including but not limited to appearance, colour, and size), as well as actual display contents (including but not limited to backgrounds, UI, and icons) may vary.
*All data in the foregoing pages are theoretical values obtained by IMILINK internal laboratories through tests carried out under particular conditions. For more information, refer to the aforementioned product details. Actual data may vary owing to differences in individual products, software versions, application conditions, and environmental factors. All data is subject to actual usage.
*Due to real-time changes involving product batches, production and supply factors, in order to provide accurate product information, specifications, and features, IMILINK may make real-time adjustments to text descriptions and images in the foregoing information pages, so that they match the product performance, specifications, indexes, and components of the actual product. Product information is subject to such changes and adjustments without notice.