IM868 Indoor 4G LTE CPE Router

Indoor 4G LTE CPE Router

  • Support 4G wireless data access and HD voice services;
  • Voice and data forwarding can be supported at the same time;
  • Broadband high-speed access;
  • The humanized design is fashionable and generous;
  • Support 4G to wireless WiFi Internet access

The 4G LTE CPE rural wireless home broadband solution can meet the market demand of rural (township last five kilometers) users and urban “supplement points”. The monthly Internet access method ensures a good user experience and can effectively improve the utilization of existing rural 4G network resources Rate and increase investment efficiency. The access cost is low, and the network elements and supporting systems of the existing network are small, which can be quickly implemented and promoted to form a broadband user scale.

IM861 Indoor 4G LTE CPE Router Introduction

IM861 4G Indoor Customer Premise Equipment (CPE Router) provides superior wireless access performance and comprehensive routing capabilities to bring wireless broadband data and voice services to end-users. It converts high-speed TDD/FDD signals to Wi-Fi signals on the local area network (LAN). Wireless and wired devices,including mobile phones, laptops, tablets, and other smart devices, can access the 4G LTE CPE Router simultaneously.

IM868 Indoor 4G LTE CPE Router
IM868 Indoor 4G LTE CPE Router
IM868 Indoor 4G LTE CPE Router

IM861 Indoor 4G CPE Router Specifications

Category Feature & specification Description
Basical Information Model Name IM861
Form Factor CPE
Dimension 225*282.3*75mm
Weight TBD
Color Black
Launch time(PP)  
Air Interface Technical Standard Compatible with   WCDMA, FDD-LTE, WCDMA,GSM
802.11 b/g/n/ac DBDC
Frequency(SKU1) LTE FDD:B1/B3/B5/B7/B8/B20
TD-LTE:B40
WCDMA:B1/5/8 
GSM:850/900/1800/1900
WIFI 2.4&5 GHz, WIFI 2*2 MIMO,802.11 b/g/n/ac DBDC
Performance Maximum Data Throughput LTE CAT6   FDD-LTE 300Mbps/50Mbps  
Hardware Receive Diversity Support Receive Diversity
MIMO Support LTE DL 4x4 MIMO
BB Chipset Qualcomm MDM9x50
AP+WIFI Chipset  MT7621A+MT7603E+MT7612EN
Memory Modem:512MB+256MB
AP:256MB+16MB
power consumption <12W
Power Voltage DC12V/1A  
USIM/SIM 2FF SIM card
support SIM/USIM/UIM,standard 6 PIN SIM card interface,
support 3V SIM card and 1.8V SIM card;internal 
push-push SIM slot
LED  Power Indication LED(SYS),WAN Signal Strength(RF), WiFi/WPS Indication LED(WIFI), WAN/LAN Status LED(ETH),Internet Status LED(NET), 
USB USB3.0 (between modems,not for end users)
Antenna   4 x LTE 4x4 MiMo
2 x WIFI (2.4 + 5G)  2*2 MIMO
Buttons POWER,Reset,WPS
Power: CPE should send the  information to network when the CPE is Powered off. 
Slic SI32185
Ethernet 1WAN+3LAN, 10BaseT/100Base/1000Base automatic adaptive port
RJ11 RJ11x1
Reset Pinhole
ESD ESD Protection circuit;Contact±8KV、Air±10KV
Software SW Update TR069 & Local Update
WIFI Mode  AP Only
WIFI Security OPEN & WPA-PSK& WPA2-PSK & WPA-PSK/WPA2-PSK;
SMS     Support 
Voice VoLTE & VOIP & CS Domain voice
AGPS Not Support  
IPv4 Support IPv4
IPv6 Support IPv6
Firewall Mac/IP address filter, Port forwarding, WiFi Black/Whilte list
ALG: SIP(must)/RSTP(optional)
         FTP(optional)
Data Statistics Support
VPN Pass Through PPTP/L2TP/IPSec
SIM Lock Support
TR069  Support;
Fota Support
SNTP Support
DOS ATTACK Support
DMZ Support
HTTP Support
HTTPS Support
Certification Certification Depends on customization, cost related
Environment Operating Temperature Normal:0°C to +45°C;
Storage Temperature -20° C  to +70° C
Humidity 5%~ 95% 

Fill out my online form.

TOP